As an Amazon Associate I earn from qualifying purchases from amazon.com

Firmware: Canon releases v1.4.0 for the Canon EOS R5 | Canon Rumors


This site contains affiliate links to products and services. We may receive a commission for purchases made through these links.

As promised Canon has released a major new firmware update for videographers that use the Canon EOS R5. This update adds external 8K ATOMOS Ninja V+ support via the HDMI port.

Firmware v1.4.0 also adds simultaneous movie recording to both memory card slots and the VPG 400 profile.

Firmware Version 1.4.0 incorporates the following fixes and enhancements:

  1. Adds support for outputting 8K/30p/10-bit video signals for ProRes RAW recording to ATOMOS’s Ninja V+ recorder* via HDMI.
    * If you have any questions about ATOMOS products, please contact ATOMOS directly.
    * Please note that the recorder may become hot.
  2. Adds support for movie recording when the camera is connected to the CN-E18-80mm T4.4 L IS KAS S or CN-E70-200mm T4.4 L IS KAS S EF cinema lenses.
    * Still photography shooting is possible however performance is not guaranteed.
    * Movie shooting in vertical position is possible however performance is not guaranteed.
    * External power supply is required for AF operation during servo zoom operation. When there is no external power supply, AF operation is activated only when the servo zoom is not in use.
  3. Adds simultaneous movie recording capability on card 1 and card 2, however RAW movies and RAW(Light) movies cannot be recorded simultaneously on card 1 and card 2.
  4. Adds support for the VPG 400 (Video Performance Guarantee Profile), a standard based on the CFexpress 2.0 specification.
  5. Improves operation stability when using the RF 400mm f/2.8L IS USM and RF 600mm f/4L IS USM.
  6. Fixes an issue in which, during HDMI connection, if the camera’s screen turns off, a zebra pattern is displayed via the HDMI output.
  7. Fixes an issue in which sufficient image stabilization effects may not be attained immediately after the start of shooting.

Download firmware v1.4.0 for the Canon EOS R5 at Canon UK



We will be happy to hear your thoughts

Leave a reply

Logo
Enable registration in settings - general
Compare items
  • Total (0)
Compare
0